1,2,3-Triazoles as leaving groups: S_NAr reactions of 2,6-bistriazolylpurines with O- and C-nucleophiles

• Dace Cīrule,
• Irina Novosjolova,
• Ērika Bizdēna and
• Māris Turks

Beilstein J. Org. Chem. 2021, 17, 410–419, doi:10.3762/bjoc.17.37

• of purine [73][74][75][76] or alkylation of inosine or guanosine derivatives (Ib→II, Scheme 1) [30][36]. In the next step, azide can be introduced either by a second SNAr reaction on the C2-halo derivative or by diazotization/azidation at C2. Then, the Cu(I)-catalyzed azide–alkyne cycloaddition

Synthesis and fluorescent properties of N(9)-alkylated 2-amino-6-triazolylpurines and 7-deazapurines

• Andrejs Šišuļins,
• Jonas Bucevičius,
• Yu-Ting Tseng,
• Irina Novosjolova,
• Kaspars Traskovskis,
• Ērika Bizdēna,
• Huan-Tsung Chang,
• Sigitas Tumkevičius and
• Māris Turks

Beilstein J. Org. Chem. 2019, 15, 474–489, doi:10.3762/bjoc.15.41

• derivative 4 was synthesized using previously reported procedure of Cu(I)-catalyzed azide–alkyne cycloaddition reaction on 2,6-diazidopurine derivatives [25]. Synthesis of 7-deazapurine derivatives 3, 10a, 11a and their characterization are described in our preliminary communication [39]. Synthesis of 9

A switchable [2]rotaxane with two active alkenyl groups

• Xiu-Li Zheng,
• Rong-Rong Tao,
• Rui-Rui Gu,
• Wen-Zhi Wang and
• Da-Hui Qu

Beilstein J. Org. Chem. 2018, 14, 2074–2081, doi:10.3762/bjoc.14.181

• +) containing intermediate compound 5 were assembled in dichloromethane through host–guest interaction and capped with compound 8 under Cu(I)-catalyzed azide–alkyne cycloaddition to get the final [2]rotaxane with two distinguishable recognition sites. The target [2]rotaxane R1 was then characterized by 1H NMR

An eco-compatible strategy for the diversity-oriented synthesis of macrocycles exploiting carbohydrate-derived building blocks

• Sushil K. Maurya and
• Rohit Rana

Beilstein J. Org. Chem. 2017, 13, 1106–1118, doi:10.3762/bjoc.13.110

• blocks were coupled via 1,3-dipolar cycloaddition (click reaction) iteratively through the development of a greener base-free Cu(I)-catalyzed azide–alkyne cycloaddition reaction. The cycloadducts were then converted to macrocycles by Ru-catalyzed cyclization reaction using greener and non-hazards

Interactions between shape-persistent macromolecules as probed by AFM

• Johanna Blass,
• Jessica Brunke,
• Franziska Emmerich,
• Cédric Przybylski,
• Vasil M. Garamus,
• Artem Feoktystov,
• Roland Bennewitz,
• Gerhard Wenz and
• Marcel Albrecht

Beilstein J. Org. Chem. 2017, 13, 938–951, doi:10.3762/bjoc.13.95

• , synthesized from polymer 8 (Scheme 3) through Cu(I)-catalyzed azide–alkyne cycloaddition (CuAAC) with the triethylene glycol linker 11 (N3-TEG-NH2) which had been prepared in a five-step procedure [62][63]. Probing multivalent interactions by AFM The adhesive forces of 12, due to supramolecular interactions

Application of Cu(I)-catalyzed azide–alkyne cycloaddition for the design and synthesis of sequence specific probes targeting double-stranded DNA

• Svetlana V. Vasilyeva,
• Vyacheslav V. Filichev and
• Alexandre S. Boutorine

Beilstein J. Org. Chem. 2016, 12, 1348–1360, doi:10.3762/bjoc.12.128

• and Instability of Genomes, Sorbonne Universités, Muséum National d'Histoire Naturelle, INSERM U 1154, CNRS UMR 7196, 57 rue Cuvier, C.P. 26, 75231 Paris cedex 05, France 10.3762/bjoc.12.128 Abstract Efficient protocols based on Cu(I)-catalyzed azide–alkyne cycloaddition were developed for the

• helices by TFO-MGB conjugates was evaluated by gel-shift experiments. The presence of MGB in these conjugates did not affect the binding parameters (affinity and triplex stability) of the parent TFOs. Keywords: binding affinity; click chemistry; Cu(I)-catalyzed azide–alkyne cycloaddition; pyrrole

Synthesis of bi- and bis-1,2,3-triazoles by copper-catalyzed Huisgen cycloaddition: A family of valuable products by click chemistry

• Zhan-Jiang Zheng,
• Ding Wang,
• Zheng Xu and
• Li-Wen Xu

Beilstein J. Org. Chem. 2015, 11, 2557–2576, doi:10.3762/bjoc.11.276

• Selective Oxidation, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, P. R. China 10.3762/bjoc.11.276 Abstract The Cu(I)-catalyzed azide-alkyne cycloaddition reaction, also known as click chemistry, has become a useful tool for the facile formation of 1,2,3-triazoles

• investigated and recognized as an epoch-making progress in organic synthesis and green chemistry [11][12][13][14][15]. After many years of research, it was proven that the Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC reaction) could be performed under various conditions according to the need of click

Design, synthesis and photochemical properties of the first examples of iminosugar clusters based on fluorescent cores

• Mathieu L. Lepage,
• Antoine Mirloup,
• Manon Ripoll,
• Fabien Stauffert,
• Anne Bodlenner,
• Raymond Ziessel and
• Philippe Compain

Beilstein J. Org. Chem. 2015, 11, 659–667, doi:10.3762/bjoc.11.74

• interest of the pyrene scaffold lies in its rigidity, a property that may favourably impact inhibitory multivalent effects [9][11][16][19]. A convergent approach comprising the attachment of azide-armed iminosugars 4 [11][12] on polyalkyne “clickable” scaffolds 5 and 6 via Cu(I)-catalyzed azide–alkyne

• cycloaddition (CuAAC) was performed for achieving our synthetic goals (Figure 2) [56][57]. With the objective of increasing water solubility and chemical stability in biological medium, triyne 6b, an analogue of F-BODIPY-based scaffold 6a was prepared by replacing the fluoro groups on the boron center with

A small azide-modified thiazole-based reporter molecule for fluorescence and mass spectrometric detection

• Stefanie Wolfram,
• Hendryk Würfel,
• Stefanie H. Habenicht,
• Christine Lembke,
• Phillipp Richter,
• Eckhard Birckner,
• Rainer Beckert and
• Georg Pohnert

Beilstein J. Org. Chem. 2014, 10, 2470–2479, doi:10.3762/bjoc.10.258

• )-catalyzed azide–alkyne cycloaddition (CuAAC) is often considered as the prototypical transformation [7][8][9]. Due to the mild conditions and the use of aqueous solvents it is an efficient tool for bioorthogonal chemistry even inside of living systems [10]. One application of this concept for functional

• fluorophores requires the attachment of the fluorescent reporter to bio(macro)molecules or synthetic probes. Especially “click chemistry”, introduced by Sharpless and coworkers in 2001 [7], is a widely used strategy to attach fluorophores covalently to other molecules. Among "click" reactions the Cu(I

Synthesis of the first examples of iminosugar clusters based on cyclopeptoid cores

• Mathieu L. Lepage,
• Alessandra Meli,
• Anne Bodlenner,
• Céline Tarnus,
• Francesco De Riccardis,
• Irene Izzo and
• Philippe Compain

Beilstein J. Org. Chem. 2014, 10, 1406–1412, doi:10.3762/bjoc.10.144

• iminosugars 5 onto polyalkyne “clickable” scaffolds 2–4 by Cu(I)-catalyzed azide–alkyne cycloaddition (CuAAC) reactions [40][41] (Figure 1). N-alkyl derivatives of DNJ were logically chosen as the peripheral ligands because of the therapeutic relevance of these compounds [42]. In addition, most of the

Efficient continuous-flow synthesis of novel 1,2,3-triazole-substituted β-aminocyclohexanecarboxylic acid derivatives with gram-scale production

• Sándor B. Ötvös,
• Ádám Georgiádes,
• István M. Mándity,
• Lóránd Kiss and
• Ferenc Fülöp

Beilstein J. Org. Chem. 2013, 9, 1508–1516, doi:10.3762/bjoc.9.172

• relatively short reaction time [18][19][20]. Recently, Cu(I)-catalyzed azide–alkyne cycloaddition (CuAAC) has become the basis of the so-called click chemistry concept due to its wide applicability and efficiency. Over the past twenty years, alicyclic β-amino acids have attracted great interest among

End-labeled amino terminated monotelechelic glycopolymers generated by ROMP and Cu(I)-catalyzed azide–alkyne cycloaddition

• Ronald Okoth and
• Amit Basu

Beilstein J. Org. Chem. 2013, 9, 608–612, doi:10.3762/bjoc.9.66

• accomplished by amidation with an azido-amine linker followed by Cu(I)-catalyzed azide–alkyne cycloaddition with propargyl sugars. Subsequent Teoc deprotection and conjugation with pyrenyl isothiocyanates afforded well-defined end-labeled glycopolymers. Keywords: capping agent; carbohydrate; glycan; olefin

High-affinity multivalent wheat germ agglutinin ligands by one-pot click reaction

• Henning S. G. Beckmann,
• Heiko M. Möller and
• Valentin Wittmann

Beilstein J. Org. Chem. 2012, 8, 819–826, doi:10.3762/bjoc.8.91

• conveniently prepared by employing a one-pot procedure for Cu(II)-catalyzed diazo transfer and Cu(I)-catalyzed azide–alkyne cycloaddition (CuAAC) starting from commercially available amines. These glycoclusters were probed for their binding potencies to the plant lectin wheat germ agglutinin (WGA) from

Synthesis of 2-amino-3-arylpropan-1-ols and 1-(2,3-diaminopropyl)-1,2,3-triazoles and evaluation of their antimalarial activity

• Matthias D’hooghe,
• Stéphanie Vandekerckhove,
• Karen Mollet,
• Karel Vervisch,
• Stijn Dekeukeleire,
• Liesbeth Lehoucq,
• Carmen Lategan,
• Peter J. Smith,
• Kelly Chibale and
• Norbert De Kimpe

Beilstein J. Org. Chem. 2011, 7, 1745–1752, doi:10.3762/bjoc.7.205

• )methyl]aziridines by Cu(I)-catalyzed azide-alkyne cycloaddition, followed by microwave-assisted, regioselective ring opening by dialkylamine towards 1-(2,3-diaminopropyl)-1,2,3-triazoles. Although most of these compounds exhibited weak antiplasmodial activity, six representatives showed moderate

• -triazol-1-yl)methyl]aziridines by Cu(I)-catalyzed azide-alkyne cycloaddition, followed by microwave-assisted, regioselective ring opening by diethyl- or dimethylamine towards the corresponding 1-(2,3-diaminopropyl)-1,2,3-triazoles. From a synthetic viewpoint, new insights were provided concerning the

Synthesis of glycoconjugate fragments of mycobacterial phosphatidylinositol mannosides and lipomannan

• Benjamin Cao,
• Jonathan M. White and
• Spencer J. Williams

Beilstein J. Org. Chem. 2011, 7, 369–377, doi:10.3762/bjoc.7.47

• ) lipophilicity allowing biphasic partitioning between butanol/water or purification by reversed-phase extraction, (ii) ability to be reduced to an aminooctyl chain for use in squarate conjugation chemistry, and (iii) capacity to be conjugated with fluorescent terminal alkynes using the Cu(I)-catalyzed azide

• –alkyne cycloaddition (CuAAC) reaction [33][34]. Results and Discussion Since their introduction by Palcic and co-workers [35], hydrophobic alkyl glycosides have proven to be valuable derivatives for enzymatic assays, as their lipophilic nature allows easy product isolation by either reversed-phase